Tokheim 262 a programming/operating manual

#TOKHEIM 262 A PROGRAMMING/OPERATING MANUAL INSTALL#
#TOKHEIM 262 A PROGRAMMING/OPERATING MANUAL PROFESSIONAL#

In this application, designed primarily for Jukeboxes, any sound source connected to the STEREO 3 channels will automatically mute any sound coming over the STEREO 1 and 2 channels. A typical power strip will have a power switch, so that when the power strip is powered on, the SCM262 is powered on.

It is designed to be plugged into a power strip which supports the whole sound system. The green POWER LED will illuminate to indicate that the mixer is powered on.

Apply power to the mixer by connecting the supplied power cable between the power connector on the mixer and the appropriate AC power supply.

The MIC/LINE and AUX OUTPUTs can be used simultaneously to feed two separate amplifiers.

#TOKHEIM 262 A PROGRAMMING/OPERATING MANUAL PROFESSIONAL#

If you are using a professional audio power amplifier, use the LINE OUTs. Note: If you are using a consumer stereo amplifier, use the AUX OUTs.

Connect the L/R outputs of the SCM262 to the L/R inputs of the amplifier.

For microphones which require phantom power, such as condenser microphones, place DIP switch 7 in the down position (phantom power on).

Connect microphone(s) to the MIC INPUTS on the SCM262.

Connect L/R STEREO INPUTS of the SCM262 to the L/R stereo outputs of the desired stereo audio equipment (CD players, VCRs, televisions, juke boxes, etc.).

Turn all gain controls counterclockwise.

Using this general setup, there are several other options available for further adjusting the SCM262 for your sound system. This is a general setup for most situations which require the combined use of a professional microphone and consumer stereo equipment. Phantom power does not affect the operation of balanced, dynamic microphones, so one can be connected to the SCM262 in combination with a condenser microphone. PHANTOM POWER: When in the down position, this switch activates a 12 V phantom power source for condenser microphones. When on, any source connected to STEREO 3 will mute STEREO 1 and 2 inputs. STEREO 3 JUKEBOX MUTE: This DIP switch turns the Juke Box Mute feature on or off. MIC 1/MIC 2 Ducking: When ducking is on, the SCM262 will automatically lower the gain of all STEREO inputs when someone is speaking into one of the microphones.ДUCKING LEVEL: Adjusts the amount of STEREO channel gain reduction when ducking is activated. LEFT/RIGHT OUTPUT MIC/LINE: DIP switches 1 and 2 adjust the left and right outputs for line- or mic-level operation.

Operate this product within its specified operating temperature range.

Doing so could result in personal injury and/or product failure.

Do not attempt to modify this product.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.The airborne noise of the Apparatus does not exceed 70dB (A).The MAINS plug or an appliance coupler shall remain readily operable.DO NOT put objects filled with liquids, such as vases, on the apparatus. DO NOT expose the apparatus to dripping and splashing.Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. REFER all servicing to qualified service personnel.UNPLUG this apparatus during lightning storms or when unused for long periods of time.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.ONLY USE attachments/accessories specified by the manufacturer.PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. The wider blade or the third prong are provided for your safety. A grounding type plug has two blades and a third grounding prong. A polarized plug has two blades with one wider than the other. DO NOT defeat the safety purpose of the polarized or grounding type plug.Do not place any open flame sources on the product.

#TOKHEIM 262 A PROGRAMMING/OPERATING MANUAL INSTALL#

DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Allow sufficient distances for adequate ventilation and install in accordance with the manufacturerвЂ™s instructions.

DO NOT block any ventilation openings.

Tokheim 262 a programming/operating manual